C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
3. Install the inlet hose (2) to the water crossover.
4. Position the inlet hose clamp (1) at the water crossover.
5. Install the bypass hose.
6. Position the bypass hose clamps at the crossover and water pump.
7. Install the generator bracket.
8. Install the power steering pump stud.
Tighten the power steering pump stud to 20 Nm (15 ft. lbs.).
9. Install the power steering pump bracket bolts and nut.
Tighten the power steering pump bracket bolts/nut to 50 Nm (37 ft. lbs.).
10. Install the power steering pump.
11. Install the A/C compressor.
