C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Starter Heat Shield: Service and Repair
STARTER SHIELD REPLACEMENT
REMOVAL PROCEDURE
1. Remove the starter motor.
2. Remove the starter heat shield bolts, and nut.
3. Remove the starter heat shield.
INSTALLATION PROCEDURE
1. Install the starter heat shield.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the starter heat shield bolts, and nut.
Tighten
-
Tighten the starter heat shield bolts to 3 N.m (35 lb in).
-
Tighten the starter heat shield nut to 5 N.m (44 lb in).
3. Install the starter motor.
