C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
1. Grasp the lower corner of the windshield reveal molding (1) by hand and slowly pull the reveal molding away from the windshield.
2. If the windshield reveal molding (1) will not release, use a utility knife in order to cut around the windshield in order to remove the windshield
reveal molding.
9. Remove the lower windshield supports (1) from the cowl panel, if equipped.
Important: Keep the cutting edge of the tool against the window.
10. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinchweld flange.
*
The only suitable lubrication is clear water.
*
Use J 24402-A, J 39032 or equivalent in order to remove the window.
11. Remove the windshield (1) from the vehicle with the aid of an assistant (2).
Installation Procedure
1. Install a stationary window into the opening.
2. Install the front door sealing weather strips to the pinchweld flange.
3. Install the rear view mirror.
4. Install the cowl air inlet grill panel.
5. Install the windshield wiper arms.
6. Install the antenna mast.
7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
