chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins:|88T48 > < Tools - Revised Brake Booster Push Rod Height Gage
Page 1
background image

Vacuum Brake Booster: All Technical Service Bulletins
Brakes - Improved Pedal Feel

Number:

88-300-5

Section:

5

Date:

JULY, 1988

Subject:

IMPROVED BRAKE PEDAL FEEL

Model and Year:

1988 C/K TRUCKS

TO:

ALL CHEVROLET DEALERS

THIS BULLETIN IS DIVIDED INTO TWO (2) SECTIONS IN ORDER TO ADDRESS SEPARATE CONDITIONS WHICH OCCUR ON
DIFFERENT BRAKING SYSTEMS. BOTH CONDITIONS MAY BE DESCRIBED BY THE CUSTOMER AS BRAKE PEDAL FEEL.

SECTION 1

Improved Brake Pedal Feel - JN3 Brake System:

Some customers may comment of hard brake pedal or lack of assist on some 1988 C/K trucks equipped with JN3 brakes (fourth digit of VIN is "D").
Beginning with the following VIN breakpoints, a new larger displacement brake vacuum booster will be installed on 1988 C/K 10 pickups with JN3
brake system. The new booster is being installed to improve power assist during braking and improve the "feel" of the brakes, especially for customers
who operate their vehicle heavily loaded most of the time.

PLANT

MODEL

VIN BREAK POINT

Ft. Wayne

C15

JZ 256482

K15

JZ 257952

Oshawa

C15

J1 256582

K15

J1 256583

Pontiac

C15

JE 181848

K15

JE 182896

Customers with vehicles built before the VIN breakpoints who operate vehicles heavily loaded may prefer the improved brake pedal feel of the new
booster. If so, the brake booster which is currently being used in production can be installed on vehicles with this condition. When installing the new
booster, follow the procedure in Light Duty C/K Service Manual, Section 5A.

Option

New Booster

Model

Code

Year

Part Number

C/K 1 Under

JN3

1988

18012114

6000 GVWR

(Built before 

with P/B

the VIN's)

Use applicable labor operation and time.

SECTION 2

Improved Brake Pedal Feel - JN5 Brake System.

Some customers may comment of a "spongy" or soft brake pedal feel or longer brake pedal travel on some 1988 C/K trucks equipped with JN5 brakes
(fourth digit of VIN is "E") that were built in the Oshawa Assembly Plant between the VIN breakpoints stated below.

Vehicles built between J1206556 and J1233550

In order to improve the brake pedal feel, the master cylinder and brake vacuum booster combination listed below may be installed.

Master Cylinder

New Brake Vacuum Booster

P/N 18013977

P/N 18012114

Labor Operation:

T7660       Labor Time: 1.0 hr

All Technical Service Bulletins:|88T48 > < Tools - Revised Brake Booster Push Rod Height Gage