C 3500 Truck 2WD V8-305 5.0L (1988)
^
Dip the seal in clean 525 viscosity refrigerant oil.
^
Seal (O-ring) to J 33011.
^
Insert J 33011 over the shaft and down until it reaches the bottom of the shaft.
^
Tower the slide on J 33011 to release the seal (O-ring) into its groove.
^
Rotate J 21508-A to seat the seal (O-ring).
2. Shift seal (12).
^
Shaft seal to J 23128-A.
^
J 23128-A and shaft seal to the shaft.
^
Slide J 23128-A over and down the shaft until it stops.
^
Disengage J 23128-A from the shaft seal with a reverse hand twisting motion.
4. Retainer ring (11).
5. Clutch drive hub (3).
