C 3500 Truck 2WD V8-379 6.2L DSL (1988)
Staking The Rotor Bearing
^
Using a center punch with a 45 degree angle point, stake 1.1-1.4 mm (0.045-0.055-inch) deep the bearing in three places 120 degrees apart.
Installing The Rotor & Bearing Assembly - V-Groove Type
2. Rotor (6) and bearing (5) assembly to the compressor with J 8092.
3. Retainer ring (4) with J 6083.
4. Pulley rim mounting screws (10) and washers (9).
^
Apply Loctite 601 or equivalent to the threads.
^
Hand spin the pulley to check for free rotation.
Tighten
^
Screws to 11 N.m (100 in. lbs.).
^
Bend the washers to lock the rim in place.
5. Rotor (5) and hub (3) assembly.
Poly-Groove Type
