C 3500 Truck 2WD V8-6.0L VIN U (2001)
6. Remove the retainers (1) from the rear assist step splash guard.
7. Loosen the retainers (4) at the cross sills (5) attachments.
8. With an assistant remove the bolts (3) and the threaded plates (1) from the cross rails (5).
Important: Care must be taken not to scratch or dent pickup box when removing or installing assist step assembly.
9. Remove the Rear Assist Step Assembly (1) from the vehicle.
10. Remove the retainers from the rear splash guard (2).
11. Remove the rear splash guard from the vehicle.
12. Ensure all areas are free from dirt or adhesive prior to installation.
Installation Procedure
Important: Install in an environment that is free from dust or dirt. Dust or dirt could come into contact with the adhesive surface and
prevent proper adhesion. The surface should be 21°C or 70°F for proper adhesion.
Important: Assist Steps must be installed front to rear due to alignment issues.
