C 3500 Truck 2WD V8-6.0L VIN U (2001)
1. Install the brake pedal.
2. Install the brake pedal bolt.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the brake pedal bolt nut.
^
Tighten the bolt to 47 Nm (35 ft. lbs.).
4. Install the pushrod (3) to the brake pedal pin (1).
5. Install the stoplamp switch (2).
6. Install the pushrod retaining clip (4).
7. Connect electrical connection to the stoplamp switch.
