C 3500 Truck 2WD V8-6.0L VIN U (2001)
1. Install the coolant air bleed hose (2) onto the pipe (1).
Important: Install the gaskets properly onto the pipe and covers. Position the O-ring seal onto the nipple portion of the pipe.
2. Install the gaskets onto the coolant air bleed pipe.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the coolant air bleed pipe and bolts.
^
Tighten the coolant air bleed pipe bolts to 12 Nm (106 inch lbs.).
4. Install the intake manifold.
Removal Procedure
2 Point Pipe