C 3500 Truck 2WD V8-6.0L VIN U (2001)
^
Tighten the bracket nuts to 25 Nm (18 ft. lbs.).
18. Install the power steering pump mounting bracket and bolts.
^
Tighten the power steering pump mounting bracket bolts to 46 Nm (34 ft. lbs.).
19. Install the water outlet tube.
20. Position the generator positive cable.
21. Install the generator positive cable in the clip on the engine front cover.
22. Install the generator positive cable and the retaining nut to the generator.
^
Tighten the generator positive cable nut to 9 Nm (80 inch lbs.).
23. Install the battery positive cable junction block bracket and bolt to the power steering pump.
^
Tighten the junction block bracket bolt to 9 Nm (80 inch lbs.).
24. Connect the generator electrical connector.
25. Position the A/C compressor.
26. Install the A/C compressor mounting bolts.
^
Tighten the A/C compressor mounting bolts to 50 Nm (37 ft. lbs.).
27. Connect the A/C cut out switch electrical connector.
28. Connect the A/C clutch electrical connector.
29. Install the drive belt.
30. Install the upper fan shroud.
31. Fill the engine coolant.
