C 3500 Truck 2WD V8-6.0L VIN U (2001)
Crankshaft: Specifications
Crankshaft Connecting Rod Journal Diameter (Production)
2.099-2.1 in
Crankshaft Connecting Rod Journal Diameter (Service Limit)
2.0987 in
Minimum
Crankshaft Connecting Rod Journal Taper (Production)
0.0002 in
Maximum for Journal Length
Crankshaft Connecting Rod Journal Taper (Service Limit) )
0.00078 in
Maximum
Crankshaft Connecting Rod Journal Out-of-Round (Production)
0.0002 in
Crankshaft Connecting Rod Journal Out-of-Round (Service Limit)
0.0004 in
Crankshaft End Play
0.0015-0.0078 in
Crankshaft Main Journal Diameter (Production)
2.558-2.5593 in
Crankshaft Main Journal Diameter (Service Limit)
2.558 in
Crankshaft Main Journal Out-of-Round (Production)
0.0001 in
Crankshaft Main Journal Out of Round (Service Limit)
0.0003 in
Crankshaft Main Journal Taper (Production)
0.0004 in
Crankshaft Main Journal Taper (Service Limit)
0.00078 in
Crankshaft Reluctor Ring Runout
0.028 in
Measured 1.0mm (0.04 inch) below the Tooth Diameter
Maximum
Crankshaft Runout (at Rear Flange)
0.02 in
(Maximum)
Crankshaft Thrust Wall Runout
0.001 in
Crankshaft Thrust Wall Width (Production)
1.029-1.032 in
Crankshaft Thrust Wall Width (Service)
1.0315 in
(Maximum)