C 3500 Truck 2WD V8-6.0L VIN U (2001)
Glove Box Lamp: Service and Repair
IP COMPARTMENT LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.
2. Remove the instrument panel storage compartment.
3. Depress the switch plunger.
4. Pull the switch assembly downward from the retainer.
5. Disconnect the electrical connector.
6. Remove the shield from the switch assembly.
7. Remove the bulb from the switch assembly.
INSTALLATION PROCEDURE
1. Install the bulb into the socket.
2. Install the shield to the switch assembly.
3. Connect the electrical connector.
4. Depress the switch plunger.
5. Slide the assembly upward into the retainer.
6. Install the instrument panel storage compartment.
