chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2007 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2005

C 3500 Truck 2WD V8-6.0L VIN U (2001)

Page 1
background image

Manifold Absolute Pressure (MAP) Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE

1. Loosen the fasteners from the intake manifold sight shield.
2. Remove the sight shield.
3. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.

4. Remove the MAP sensor (1) from the intake manifold.

INSTALLATION PROCEDURE

IMPORTANT:  Lightly coat the MAP sensor seal with clean engine oil before installing the sensor

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2007 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2005