chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Drive/Propeller Shaft|Front|Page 9327 > < Drive/Propeller Shaft|Front|Page 9325
Page 5
background image

11. Install the yoke retainers (2) and the bolts (1). 

^

Tighten the yoke retainer bolts to 25 Nm (19 ft. lbs.).

12. Using the J 43218, crimp the boot clamps until the dimensions shown are obtained. 
13. Lower the vehicle. 

Drive/Propeller Shaft|Front|Page 9327 > < Drive/Propeller Shaft|Front|Page 9325