chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 13614 > < Procedures|Page 13612
Page 2
background image

4. Remove the screws holding the ashtray housing to the rear of the I/P lower trim panel.
5. Remove the ashtray housing from the lower trim housing.

Installation Procedure

1. Install the ashtray housing to the lower I/P trim panel.

Notice:  Refer to Fastener Notice   (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) in Cautions and Notices.

2. Install the screws holding the ashtray housing to the rear of the I/P lower trim panel.

Tighten the ashtray housing screws to 2 Nm (18 lb in).

3. Connect the ashtray lamp wiring harness to the ashtray housing.

4. Install the lower I/P trim panel. Refer to Instrument Panel Lower Trim Panel Replacement   (See: Dashboard / Instrument Panel/Service and

Repair/Instrument Panel (I/P) - Trim Panel Replacement/Trim Panel Replacement - Lower).

Procedures|Page 13614 > < Procedures|Page 13612