C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Trim Panel: Service and Repair
Center Pillar Garnish Molding Replacement
Center Pillar Garnish Molding Replacement
Removal Procedure
1. Remove the door sill plates. Refer to Front Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and Repair/Removal and
Replacement/Front Side Door Sill Trim Plate Replacement) or Rear Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and
Repair/Removal and Replacement/Rear Side Door Sill Trim Plate Replacement).
2. Remove the pillar moldings by holding the moldings firmly while pulling out.
Installation Procedure
1. Install the pillar moldings by pushing until the molding locks into place.
2. Install the door sill trim plates. Refer to Front Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and Repair/Removal and
Replacement/Front Side Door Sill Trim Plate Replacement) or Rear Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and
Repair/Removal and Replacement/Rear Side Door Sill Trim Plate Replacement).
