C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension from the park brake cables from the equalizer by pulling down on the intermediate cable and release the rear cables from the
equalizer bar.
4. Remove the safety stands.
5. Lower the vehicle.
6. Remove the left side hinge pillar panel.
7. Disconnect the park brake warning lamp connection.
8. Remove the MID-Bussed Electrical Center bracket.
9. Disconnect the park brake release cable from the park brake lever.
