C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install a new O-ring to the bypass pipe. Lubricate the O-ring with coolant.
2. Install the bypass pipe to the thermostat housing crossover.
3. Install new thermostat crossover gaskets.
4. Install a new O-ring for the bypass pipe to the water pump.
6. Install the thermostat crossover with the bypass pipe.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the bypass pipe to water pump bolts.
-
Tighten the bypass pipe to water pump bolts to 21 Nm (15 ft. lbs.).
7. Install the thermostat crossover bolts and nuts.
-
Tighten the thermostat crossover bolts and nuts to 21 Nm (15 ft. lbs.).
8. Install the fuel line bracket and bolt.
-
Tighten the fuel line bracket bolt to 21 Nm (15 ft. lbs.).