C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Important: The outlet duct must be fully seated against the MAT/IAT sensor with the edge of the seal in the vertical position.
19. Install the outlet duct to the MAF/IAT sensor.
20. Tighten the outlet duct clamps at the turbocharger and the MAF/IAT sensor.
-
Tighten the clamps to 6 Nm (53 ft. lbs.).
21. Install the upper intake manifold cover.
22. Install the upper intake manifold cover to the outlet duct.
23. Tighten the outlet duct clamp at the upper intake manifold cover.
-
Tighten the clamp to 6 Nm (53 ft. lbs.).