chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement (W/ Harrison)|Page 11719 > < A/C - Doesn't Blow Cold Enough|Page 11716
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement (W/ Harrison)

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the A/C compressor hose assembly mounting bolt (2) from the A/C compressor (3).

Discard the bolt.

3. Disconnect the A/C compressor hose assembly (1) from the compressor (3).

4. Remove the nut at the accumulator.

Discard the nut.

5. Disconnect the A/C compressor hose from the accumulator.
6. Remove the upper radiator baffle. Refer to Radiator Air Baffle Assemblies and Deflectors (Side) or Radiator Air Baffle Assemblies and Deflectors

(Upper) in Cooling System.

Compressor Hose Assembly Replacement (W/ Harrison)|Page 11719 > < A/C - Doesn't Blow Cold Enough|Page 11716