C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Metal Collar)
TOOLS REQUIRED
J 44581 Fuel Line Disconnect Tool
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the fuel filler cap.
3. Remove the retainer from the quick-connect fitting.
4. Blow dirt out of the fitting using compressed air.
5. Choose the correct end of the for the size of the fitting. Insert the tool into the female connector, then push inward in order to release the locking
tabs J 44581.
6. Pull the connection apart.
7. Use a clean shop towel in order to wipe off the male pipe end.
8. Inspect both ends of the fitting for dirt and burrs. Clean or replace the components as required.
INSTALLATION PROCEDURE
1. Apply a few drops of clean engine oil to the male pipe end.