C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
8. Remove the fuel bundle retaining nuts (2) from the chassis (1).
9. Disconnect the electronic brake control module mounting bracket (3) from the frame rail (5).
10. Allow the electronic brake control module to remain loose in order to allow fuel pipe clearance.
11. Remove the fuel bundle (3) using the following procedure:
11.1. Guide the fuel bundle (2) pipes towards the rear of vehicle to clear the engine.
11.2. Lower the fuel bundle while moving it foreword and out.
NOTE: Refer to Nylon Fuel Lines Notice in Service Precautions.
12. If replacing an individual fuel pipe, remove the pipe from the retaining clips.
INSTALLATION PROCEDURE