C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Remove the caps from the fuel tank hose/pipes.
4. Connect the fuel feed and return hose/pipes at the fuel tank.
5. Install the EVAP canister.
6. Install the fuel hose/pipe clips to the transmission brackets.
7. Install the fuel hose/pipe clip to the transfer case bracket, if equipped with 4WD.
8. Install the fuel hose/pipe bracket to the bellhousing stud.
9. Install the fuel hose/pipe bracket nut (5) to the bellhousing stud.
10. Lower the vehicle.
11. Remove the caps from the fuel rail pipes.
12. Connect the EVAP tube rear connection.
13. Connect the fuel feed (1) and return pipes (2) to the fuel rail.
14. Install the fuel fill cap.
15. Connect the negative battery cable.
