C Tahoe 2WD V8-5.3L VIN T (2001)
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Release the tension on the cables by loosening the nut at the equalizer.
4. Disconnect the rear cables from the equalizer.
5. Remove the rear cables from the mounting bracket by depressing the retaining tabs and pulling rearward.
6. Remove the cable support bracket nuts.
7. Remove the cable support bracket.
Installation Procedure
1. Install the cable support bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the cable support bracket inputs.
^
Tighten the support bracket nuts to 85 Nm (64 ft. lbs.).
