C Tahoe 2WD V8-5.3L VIN T (2001)
7. Remove the water pump inlet bolts.
8. Remove the water pump inlet and thermostat from the water pump.
Installation Procedure
1. Install the thermostat and water pump inlet to the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the water pump inlet bolts.
^
Tighten the water pump inlet bolts to 15 Nm (11 ft. lbs.).
3. Install the outlet hose to the water pump.
4. Position the outlet hose clamp at the water pump.
