C Tahoe 2WD V8-5.3L VIN T (2001)
Control Assembly: Service and Repair
HVAC System - Automatic
Blower Motor Control Processor Replacement - HVAC System - Automatic
REMOVAL PROCEDURE
1. Disconnect the electrical connector at the blower motor.
2. Disconnect the electrical connector (4) from the blower motor control processor (2).
3. Remove the blower motor control processor retaining screws (3) from the HVAC module (1).
4. Remove the blower motor control processor (2) from the HVAC module (1).
INSTALLATION PROCEDURE