C Tahoe 2WD V8-5.3L VIN T (2001)
Torsion Bar: Service and Repair
Torsion Bar Bushing Replacement
^
Tools Required
-
J 36202 Torsion Bar Unloading/Loading Tool
Removal Procedure
Important: This procedure requires the removal of both torsion bars.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the torsion bars. Refer to Torsion Bar Replacement.
3. Remove the bushing from the bracket utilizing a bushing driver or the equivalent.
Installation Procedure
1. Install the bushing to the bracket utilizing a bushing driver or the equivalent.
2. Install the torsion bars. Refer to Torsion bar Replacement.
3. Remove the safety stands.
4. Lower the vehicle.
5. Measure the Z height. Refer to Trim Height Inspection Procedure.
6. Turn the adjustment bolt clockwise to increase the Z height and counterclockwise to lower the Z height.