C Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2002)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure.
2. Clean all the fuel pipe connections and the surrounding areas before disconnecting the pipes in order to avoid possible contamination of the fuel
system.
3. Disconnect the fuel feed and return pipes (1, 2) from the fuel rail.
4. Cap the fuel rail pipes.
5. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Remove the fuel pipes from the bellhousing stud clip (4).
7. Remove the fuel pipes from the transmission bracket clip.
8. Remove the fuel pipes from the transfer case bracket clip, 4-wheel drive only.
