C Tahoe 2WD V8-5.7L VIN R (1996)
Air Door Actuator / Motor: Service and Repair
Temperature Actuator Removal and Installation
Temperature Actuator Location
Temperature Actuator Replacment
Remove or Disconnect
1. Negative battery cable.
2. Roll instrument panel forward.
3. Electrical connector.
4. Screws.
5. Actuator.
Adjust
A. Electrical connector to the actuator.
B. Turn the ignition key to the run position and let the actuator position itself.
C. Turn off the ignition key.
D. Remove the actuator from the electrical connector.
Install or Connect
1. Actuator.
2. Screws.
3. Electrical connectors.
4. Instrument panel compartment.
5. Negative battery cable.
^Check circuit operation.
