Camaro V6-173 2.8L (1983)
Neutral Safety Switch: Service and Repair
CAMARO & 1984---88 CORVETTE
1.
Remove floor console cover, then disconnect electrical connectors from switch.
2.
Place shift lever in ``Neutral'' position of detent plate, then remove switch attaching screws and switch.
3.
To install, ensure that the shift lever is in ``Neutral,'' then position switch on shift lever making sure pin on shaft is in slot of switch.
4.
Install attaching screws and torque to 16 inch lbs.
5.
Move shift lever out of ``Neutral'' to shear pin which is part of new switch.
6.
Reconnect electrical connectors to switch, then apply parking brake and start engine. Check back-up lights and seat belt warning system for proper
operation and ensure that engine will start only in ``Park'' or ``Neutral.''
7.
Turn ignition off and install floor console.
