Camaro V6-3.8L VIN K (1995)
2. Lubricate new banjo bolt O-ring with clean brake fluid and install into the brake combo valve and hydraulic modulator.
3. Hydraulic modulator to brake combo valve. Hold brake combo valve and rock into position on hydraulic modulator inserting transfer tube
assemblies into brake combo valve ports.
4. Two hydraulic modulator to brake combo valve banjo bolts. Tighten Banjo bolts to 16 Nm (12 ft. lbs.)
5. With the hydraulic modulator upside down, and the gears facing you, rotate each hydraulic modulator gear counterclockwise until movement
stops. This procedure will position the pistons very close to their home position of the modulator bore simplifying the brake bleeding procedure.
6. Motor pack to hydraulic modulator. See: Brake Modulator/Motor Pack Assembly Replacement
7. Gear cover to hydraulic modulator/motor pack assembly. See: Gear Cover Replacement