Camaro V6-3.8L VIN K (1995)
Water Pump: Service and Repair
Water Pump
REMOVE OR DISCONNECT
1. Drain radiator, refer to System Draining, Flushing and Filling.
2. Serpentine belt.
3. Radiator inlet hose from pump.
4. Water pump pulley bolts/screws (27).
5. Water pump pulley (28).
6. Water pump bolts/screws (29).
7. Water pump (32) and water pump gasket (33).
8. Clean all gasket surfaces and water pump bolts/screws.
INSTALL OR CONNECT
1. New water pump gasket.
2. Water pump.
3. Water pump bolts/screws and tighten to 15 Nm (11 lb ft) plus 8O°.
4. Water pump pulley and bolts/screws. Tighten to 13 Nm (115 lb in).
5. Serpentine belt.
6. Radiator inlet hose to water pump.
7. Add engine coolant, refer to System Draining, Flushing and Filling.
8. Inspect for leaks, after running engine to normal operating temperature.