Chevrolet Workshop Service and Repair Manuals > Camaro V6-3.8L VIN K (1995) > Engine, Cooling and Exhaust | Engine | Tune-up and Engine Performance Checks | Spark Plug Wire <--> [Ignition Cable] | Component Information | Technical Service Bulletins

Page 2

INSTALL OR CONNECT

1. Spark plug wire harness to spark plugs.

NOTE:To complete installation of heat shield and boot to spark plug, lower tabs of heat shield must extend over hex on spark plug.

2. Spark plug wire harness to ignition control module.
3. Spark plug wire harness to wire harness retainers.

Chevrolet Workshop Service and Repair Manuals