Camaro V6-3.8L VIN K (1995)
3.
Skew the pulley 5-10° toward the full cold position and snap the spring back into the pulley. A properly adjusted cable (with the temperature knob
in the mid position - halfway between full cold and full hot) will look like Figure 10.
4.
Cycle the temperature control knob from full cold to full hot. The temperature control door should make a thumping sound when closing if it is
working properly.
5.
Reinstall the cable, cable screw and right instrument panel sound insulator assembly. Procedure complete.
PARTS INFORMATION
P/N
Description
10281598
Temperature Control Cable Assembly (Chev Only)
10281599
Temperature Control Cable Assembly (Pontiac Only)
10282056
Spring Retainer
Parts are expected to be available on 5/1/95 at GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor Operation
Labor Time
D0447 -
Use Published Labor
(To Replace Cables)
Operation Time.
D0447 -
0.3 hr
(To Install Spring
Retainer)