Camaro V6-3.8L VIN K (1995)
Alignment: Specifications
Alignment Specifications
Front Alignment Specifications
Caster Angle, Degrees
Limits ............................................................................................................................................................................................................. +4.1 to +4.9
Desired ......................................................................................................................................................................................................................... 4.4
Camber Angle, Degrees
Limits ................................................................................................................................................................................................................. - .1 to +.9
Desired ....................................................................................................................................................................................................................... +0.4
Total Toe, Degrees ................................................................................................................................................................................................. -.2 to +.2
Ball Joint Wear
Lower .......................................................................................................................................................................................................................... [01]
Upper .......................................................................................................................................................................................................................... [03]
[01] Wear is indicated by position of 1/2 inch diameter nipple in which grease fitting is threaded. If nipple is flush or inside cover surface, replace ball
joint.
[03] Deflection on dial indicator, when positioned against wheel rim, should not exceed .125 inch while moving top of wheel in and out.
Rear Alignment Specifications
Camber Angle, Degrees
Limits .................................................................................................................................................................................................................. -.6 to +.6
Desired ............................................................................................................................................................................................................................ 0
Total Toe, Degrees
Limits .................................................................................................................................................................................................................. -.3 to +.3
Desired ............................................................................................................................................................................................................................ 0
Thrust Angle ...................................................................................................................................................................................................... -.15 to +.15