Camaro V6-3.8L VIN K (1995)
Steering Gear: Service and Repair
Power Steering Gear
Fig. 13 Power Steering Gear Installation
1. Raise and support vehicle, then remove wheels.
2. Disconnect inlet and outlet hoses from steering gear, then the steering linkage outer tie rods from steering knuckles, Fig. 13.
3. Disconnect steering gear coupling shaft from steering gear, then remove steering gear.
4. Reverse procedure to install, noting the following:
a. Tighten fasteners to specifications.
b. Adjust steering gear so that it aligns as straight as possible with steering gear coupling shaft.
c. Refill and bleed power steering system.
