Camaro V6-3.8L VIN K (1995)
5.
Using compressed air and a shop towel, remove as much excess adhesive remover or cleaner residue from under the lace molding as possible.
6.
Pressure wash the area to ensure all adhesive residue and solvent has been removed.
7.
On vehicles with the partial lace molding, secure both ends of the lace molding to the glass by applying a bead of GM Weatherstrip Adhesive, P/N
12345097, approximately 25-50 mm (1-2 inches) long between the lace molding and glass edge as shown in Figure 1.
8.
If necessary, wash the vehicle prior to customer delivery.
Parts Information
P/N
Description
Quantity
12345097
GM Weatherstrip Adhesive
1
1050172
Tar and Road Oil Remover
N/A
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use as shown.