chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Convertible - Noise, Seat Belt Trim, Operation & Leaks|Page 6729 > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Technical Service Bulletin # 9226010

Date: 920801

Convertible - Noise, Seat Belt Trim, Operation & Leaks

Number:
92-260-10

Section:
10

Date:
AUGUST 1992

Corporate Bulletin No.: 
231042R

ASE No.: 
B1

Subject:
CONVERTIBLE ENHANCEMENTS - NOISE, SEAT BELT TRIM, OPERATING AND LEAK ISSUES

Model and Year:
1987-92 CAMARO

Application:
1987-92 Chevrolet Camaro Convertibles

Condition:

The following bulletin addresses eleven issues which are divided into four categories: 1) noise related; 2) seat belt quarter trim cap issues; 3) operating
issues; and 4) leak issue.

NOTE:
To avoid damage when lowering or raising the convertible top, refer to the 1992 Service Manual Section 10-8 for proper procedures.

Noise Related

Application:
1989-1992 VIN breakpoints: NL101013

Condition:

The following three conditions may exist causing squeak and rattle in the number one bow area.

(1)

Rattle between the number one bow and the side rails.

(2)

Squeak between number one bow and number one bow garnish molding.

(3)

Rattle between number one bow boss and number two bow pivot link.

Correction:

Perform all the following corresponding corrections.

CORRECTION FOR CONDITION (I):

Add a wavy washer P/N 12520633 and *Loctite Removable Threadlocker # 242 to provide tighter fit of number one bow and side rails.

1.

Lower the top halfway. Refer to 1992 Service Manual Section 10-8 for removal of the number one bow garnish molding and remove.

Convertible - Noise, Seat Belt Trim, Operation & Leaks|Page 6729 > < Air Bag(s) Arming and Disarming|Service and Repair