Camaro V8-305 5.0L VIN E TBI (1989)
Figure 3
Procedure:
1.
Disconnect the negative battery cable.
2.
Install the A/C pressure switch in the valve fitting of the A/C pipe from the evaporator to the condenser (as shown in Figure 3).
3.
Connect the wire assembly to the engine harness and the A/C harness and route the wire assembly around the A/C accumulator and connect to the
pressure switch (as shown in Figure 3).
4.
Reconnect the negative battery cable.
5.
Start the engine, put the A/C control selector in DEFROST mode and FULL COLD and check for the cooling fan operation.
Labor Operation Number:
T1462
Labor Time:
0.3 Hours
The VIN breakpoint for 1989 vehicles with (VIN E) engines that already have A/C pressure switch and wire assembly is:
KL184401
