chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Parking Lamp: > < Park/Turn Lamps - Condensation/Water Inside
Page 2
background image

Water collects on fascia surface and enters lamp through lamp drain hole.

CORRECTION:

Notch fascia as outlined in the following procedure.

1.

Remove front park/turn lamp as outlined in the Service Manual.

2.

Using a small fine tooth hand saw, notch facia in lamp opening as shown in Figure 1.

3.

Reinstall lamp.

4.

Repeat for other side if necessary.

Labor Operation Number:

T1652 Right Side      T1653 Left Side

Labor Time:

0.4 Hours    0.4 Hours

FAILURE CODE:

92

All Other Service Bulletins for Parking Lamp: > < Park/Turn Lamps - Condensation/Water Inside