chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Horn Switch > < Diagram Information and Instructions|Page 7916
Page 1
background image

Headlamp Switch: Service and Repair

Fig. 9 Headlamp Switch Replace

1.

To avoid personal injury when servicing models equipped with Supplemental Inflatable Restraint (Airbag) System, temporarily disarm
system. Refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair.

2.

Disconnect battery ground cable.

3.

Open screw covers, then remove knee bolster attaching screws and knee bolster.

4.

From under instrument panel, depress release button on light switch, then remove switch knob and shaft assembly from switch, Fig. 9.

5.

Remove instrument cluster trim plate, then remove switch retaining nut.

6.

Lower switch and disconnect electrical connector, then remove switch.

7.

Reverse procedure to install.

8.

After completing service procedure activate Supplemental Inflatable Restraint (Airbag) System. Refer to MAINTENANCE
PROCEDURES/AIRBAG SYSTEM DISARMING.

Horn Switch > < Diagram Information and Instructions|Page 7916