Camaro V8-305 5.0L VIN E TBI (1989)
Transmission Position Switch/Sensor: Testing and Inspection
Computer Command Control - Port Fuel Injection
Chart C-1
Chart C-1 Wiring Diagram
CIRCUIT DESCRIPTION:
The Park/Neutral Switch contacts are closed to ground in park or neutral and open in drive ranges.
The ECM supplies ignition voltage, through a current limiting resistor, to CKT 434 and senses a closed switch, when the voltage on CKT 434 drops to
less than one volt.
The ECM uses the P/N signal as one of the inputs to control:
