chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - New Spacer Plate Identification Tab|Page 4079 > < A/T - 4L60 Binding/Inoperative In Reverse|Page 4074
Page 1
background image

Valve Body: All Technical Service Bulletins
A/T - New Spacer Plate Identification Tab

Number:

89-247-7A

Section:

7A

Date:

September 1989

Corporate Bulletin No.: 977139

Subject:
NEW SPACER PLATE IDENTIFICATION TAB

Model and Year:
1981-89 B, F, G WITH THM 200-4R AUTOMATIC TRANSMISSION

TO:

ALL CHEVROLET DEALERS

Information on a new identification tab added to all THM 200-4R valve body spacer plates. The new ID tab will allow the identification lefters to be
read while the valve body is installed in the transmission.

Previous spacer plates could not be identified while assembled in the transmission because the identification letters were obscured by the valve body. A
tab has been added at a different location (shown in Figure 1) and the identification letters are now visible after assembly.

A/T - New Spacer Plate Identification Tab|Page 4079 > < A/T - 4L60 Binding/Inoperative In Reverse|Page 4074