chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Chevrolet Camaro V8-305 5.0L VIN F FI (1985)|Maintenance > < Wiper Switch|Service and Repair
Page 2
background image

Fig. 18 Column mounted wiper switch removal. 1982---88 w/tilt column

Fig. 19 Wiper switch pivot removal. Models w/column mounted switch

CAMARO EXC. 1984-86 BERLINETTA, 1983 MALIBU, 1983---88 MONTE CARLO, 1984-88 CHEVROLET

1.

Disconnect battery ground cable and remove turn signal switch as outlined.

2.

Remove ignition lock, ignition switch and dimmer switch as outlined.

3.

Remove ignition lock housing retaining screws and housing, Figs. 17 and 18.

4.

Remove pivot bolt and wiper switch from lock housing, Fig. 19.

5.

Reverse procedure to install.

Fig. 20 Right control pod removal. 1984---86 Berlinetta

1984---86 BERLINETTA

1.

Disconnect battery ground cable.

2.

Remove retaining screw from bottom front of right control pod housing, then release retaining tab.

3.

Disconnect electrical connector, then slide right pod assembly from track, Fig. 20.

4.

Reverse procedure to install.

Chevrolet Camaro V8-305 5.0L VIN F FI (1985)|Maintenance > < Wiper Switch|Service and Repair