Camaro V8-305 5.0L VIN H 4-bbl (1983)
DATE CODES
2)
Locate the hood bonding date code, written in crayon on the rear portion of the air scoop depression.
a.
Hood assemblies requiring replacement are identified within the following parameters:
A.
Inspection
3)
The service procedure for replacing the involved hood assembly may be found in 1983 "Camaro Shop Manual", Section 2C, Pages 2C-1
through 2C-6.
4)
Hoods not identified within the date codes referred in Step 2 are not involved.
5)
Reinstall the hood insulator using new retainer clips.
6)
Install campaign label according to instructions contained in this bulletin.
7)
Close hood.
PARTS INFORMATION
Parts required to complete this campaign are to be obtained by the dealer from your Warehousing and Distribution Division of General Motors.
Dealers are to order and install hoods immediately.
Part Number
Quantity
Description
14047994
1
RPO LG4 Hood Assy.
(Unprimed)
14047976
1
RPO LG4 Hood Assy.
(Primed)
14047995
1
RPO LU5 Hood Assy.
(Unprimed)
14019569
1
RPO LU5 Hood Assy.
(Primed)
14047935
1
Left Hand Hood Decal
14047936
1
Right Hand Hood Decal
3977775
17
Hood Insulator Retainer
Parts are to be ordered from WDDGM on a C.I.O. order with no special instruction code, but order on an advise code (2).
Claim Information
Submit a Product Claim with the information indicated below:
**
***
****
Parts
Failed
*Parts
Failure
Labor
Labor
Other
Net
Count
Part No.
Allowance
Code
Operation
Hours
Hours
Amount
10
3977775
4.16
00
V1630
.3
Description:
Partially remove hood insulation and inspect bonding date code. No further action required, vehicle not within suspect range.
Reinstall insulation with new retainers.
**
***
****
