chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

System Diagnostic Charts - C3 System|Page 3184 > < System Diagnostic Charts - C3 System
Page 2
background image

Chart C-5 Electronic Spark Control (ESC) Check (Turbo)

Fig. 042 - Chart C-5 Electronic Spark Control (ESC) Check

CHART C-5, ELECTRONIC SPARK CONTROL

    If the timing is retarded at idle, it may be due to ESC operating. ESC should not operate unless a knock is present.

1.

This is the ESC functional check. Simulating an engine knock by tapping the engine block should normally cause an RPM drop (decrease timing).
If it doesn't drop, either the timing is not retarding or is retarded all the time.

2.

This should cause full retard by dropping the voltage at ECM term. "L." Retarded timing should cause an RPM drop.

3.

Normally, voltage should be .08V AC or higher for a good knock sensor circuit.

4.

Check engine light should be "on" and a Code 43 set because ESC system would be retarded too long. If no light comes on, the ECM is not

System Diagnostic Charts - C3 System|Page 3184 > < System Diagnostic Charts - C3 System