chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Frame: > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 6002
Page 1
background image

Frame: All Technical Service Bulletins
Doors (Front) - Squeaking Noises

Number:

91-246-10

Section:

10

Date:

MARCH 1991

Corp. Bulletin No.: 131013

Subject:

SQUEAKS FROM REAR OF DOORS

Model and Year:

1982-91 CAMARO WITH T-TOPS OR CONVERTIBLES

Condition:

Some customers may comment about squeaks coming from the rear areas of front doors.

Cause:

May be due to metal portion of wedge plate system becoming dry and generating squeak noise.

Correction:

Replace the body side portion of the wedge plate system with new plastic type available from GMSPO, P/N 10198229.

Parts are currently available from GMSPO.

Procedure:

1.

Remove original metal type body side wedge plate and gasket from the door opening and discard.

2.

Install the new plastic type wedge plate to the body with the original screws and torque to 2.0 N-m (18 lbs.in.).

3.

Check for proper contact by placing a piece of masking tape on the wedge plate and slowly closing the door. Open the door and check the tape for
contact marks.

Important:

Properly adjusted wedge plates should have approximately 1.0 mm of interference with the door in the full closed position.

Shims that locate behind the door portion wedge plate are available from GMSPO and come in the following thickness.

1.0 mm - P/N 20452860

2.0 mm - P/N 20452861

Parts are currently available from GMSPO.

Labor Operation Number:

T1548

Labor Time:

.2 Hours Per Side

Trouble Code:

92

All Other Service Bulletins for Frame: > < Body - Squeeze Type Resistance Spot Welding/Equipment|Page 6002