Camaro V8-350 5.7L (1989)
Console: All Technical Service Bulletins
Instrument Panel - Squeak/Popping Noise
Number: 91-159-10
Section: 10
Date: January 1991
Corporate Bulletin No.: 031077
SUBJECT: CENTER INSTRUMENT PANEL SQUEAK/POPPING NOISE
Mdel and Year:
1988-91 CAMARO
TO: ALL CHEVROLET DEALERS
Condition:
Center instrument panel squeak. Also, center instrument panel popping noise.
Cause:
Contact between instrument panel and center console.
Correction:
1.
Remove center console by following Service Manual procedures.
2.
Place adhesive-backed felt in areas of contact. See Figure.
3.
Additionally, measure distance from horizontal felted surface (See Figure) to center of instrument panel wiring harness rosebud retainer. If
distance is approximately 15 mm (1-1/16 inch), relocate the retainer by drilling a 6 mm (1/4 inch) hole in the instrument panel approximately
10 mm (7/16 inch) below the existing hole and moving the rosebud harness fastener to the new hole. See Figure.
4.
Reinstall center console using Service Manual procedures.
