Camaro V8-350 5.7L (1989)
"CLICK" is heard. Remove the tool from the buckle assembly.
NOTICE:
Pushbutton should now move up and down freely. If it does not, repeat stops 2-6 to remove and reinstall pushbutton.
7.
Buckle protector installation.
NOTICE:
Buckles in some 1989 vehicles and buckles in all 1990 model year vehicles will not require the installation of buckle
protectors. To determine if protectors are needed on 1989 vehicle buckles, note the assembly date stamp on the lower cover -
Figure # 10. If the stamp on the buckle is after 120489 (April 12, 1989), it will not require a protector. These buckles have
revised lower cover ramps and do not need an additional protector.
After determining if a vehicle requires protectors, position stainless steel protector onto buckle lower cover - Figure # 11. Push steel protector
onto cover until it snaps securely.
8.
Perform final inspection of safety belt by inserting the latchplate into the buckle and pulling on the safety belt webbing to insure proper
latching. Unlatch and repeat this step five times to assure proper operation.
9.
Install Campaign Identification Label.
