Camaro V8-5.7L VIN G (1998)
Keyless Entry Transmitter Battery: Service and Repair
REMOVAL PROCEDURE
1. Perform the following steps to separate the top cover from the bottom of the transmitter:
1.1. Insert a coin into the slotted end of the transmitter.
1.2. Pry the transmitter apart.
2. Remove the old battery.
INSTALLATION PROCEDURE
1. Install the new battery.
2. Use battery type CR2032, or the equivalent.
3. Install the top cover by snapping the cover onto the bottom of the transmitter.
4. Stand near the vehicle and hold the transmitter. Push any button on the transmitter in order to resynchronize the transmitter and the body control
module (BCM).